One of the biggest problems with TPU is that it will begin to bunch up in the extruder and begin coming out of weird places.Д«ecause the filament is not rigid, it can bunch up and snake out of the extruder bearing. If the printer seems to handle it like a champ and has everything under control, you can try to increase the speed in increments of 5 until you start running into issues. To successfully print TPU on your CR-10, youвЂ™ll need to lower the print speed to 20 mm/s or so and test the performance.Дў0 mm/s is a good place to start. LetвЂ™s look at TPU first, which is one of the most challenging filaments to print. But what if you wish to print other materials? TPU

Print speeds for the CR-10 and other materials Ideally, as soon as your resolution is in the 0.01mm area, you should decrease the speed to 40 or 50 mm/s, especially if you wish to get lots of amazing detail in your prints. When to use low print speedsДЇor any model that requires detail, you must use a low print speed, even if youвЂ™re using PLA. This will probably make a 10-20% difference in your print times, so itвЂ™s worth a try. The outline(perimeter) must be printed properly in order to get a good finish.

Going fast on the infill is not a problem since it is all on the inside of the print. These settings are very easy to change in any slicer, though if youвЂ™re using Cura, you may have to access it from the gear menu that opens advanced settings. If you do wish to increase the print speed as much as possible, one thing you can do is to set the outline speed to 50 or 60 mm/s, and increase the infill speed. If the nozzle is moving too fast, you may end up with stringing issues as the extruder is not able to retract the filament quick enough, so youвЂ™ll get unwanted dripping.Д¬onversely, you may have under-extrusion issues if the extruder is not pushing enough filament or the temperature is not high enough! Middle ground CR-10 print speeds The moment you try to print something with more detail, though, youвЂ™ll run into problems. This is because these models donвЂ™t need much retraction and travel: the nozzle is constantly laying down filament as it moves. You can try setting the speed to 80 mm/s or even 100 mm/s and observe what happens. If youвЂ™re printing models that donвЂ™t require much detail, or are largely boxy in shape, a fast print speed will work. However, there are situations in which you can manage very fast prints without compromising on quality. The advertised print speed of the CR-10 3D printer is quite high, which is more of a gimmick than anything else.

That means the temperature must be hot enough to extrude enough plastic, the extruder must be strong enough to push so much plastic, and the stepper motors must be efficient enough to move so quickly.ДЇinally, printing at very high speeds can introduce unwanted vibrations into your prints due to the entire frame wobbling due to the fast movement! When you can get away with high print speeds Why you should max out the CR-10вЂ™s print speed at 60 mm/sДЄ 3D printer actually involves a lot of things happening at once, and increasing the print speed will depend on everything else in the printer needing to keep up with the nozzle. The 60 mm/s setting is a sweet spot as itвЂ™s still decently fast, but not too fast as to introduce vibrations and screw up your print. Realistically, the highest print speed you should set on your CR-10 is around 60 mm/s for PLA prints. ThatвЂ™s exactly what weвЂ™re going to explore in this post. But whatвЂ™s the max CR-10 print speed that you can pull off without messing up your prints? The Creality CR-10 is an incredibly popular 3D printer thatвЂ™s well known for its reliability and print quality.

Free 3d slicers for cr 10